top of page

Designed for Sustainability

Groundskeeping

Groundkeepers can improve efficiency with GPS guidance. Targeted foliar nutrition enhances turf uptake and performance, while low-drift nozzles ensure accurate spraying, protecting playing surfaces, surrounding areas and the environment.
Filter by Brand
By Category
Sorry, there are no available products for the selected Brand or Category.
£7.07

PWM bodies will enable the correct application from each nozzle even when going around a corner where the outer edge of the boom is travelling much faster than the inner edge, so giving a lower rate of application. PWM corrects this by changing the duty cycle at each nozzle to compensate accordingly.

 

Download the Application Rate Chart here

 

Get 5% off for bags of 30, 10% off for bags of 50 and 15% off for bags of 100

£6.95

The world famous Billericay Bubble Jet is now available as a 90% lower drift nozzle. We have reduced the number of sub 150 micron droplets to produce an outstanding, low drift option. Coverage is maintained by an excellent distribution of droplets. Fan angle is dependent on working pressure, but between 100 and 110 degrees.

 

Get 5% off for bags of 30, 10% off for bags of 50 and 15% off for bags of 100

£5.53

Award winning, internationally renowned and industry leading range of air induction nozzles. Manufactured in Britain, these precision made LERAP 3 star rated nozzles are suitable for most sprayers including VLV, HV applications and knapsacks. Ten nozzle variations are available with application rates ranging from 20 – 905 litres per hectare.

 

Get 5% off for bags of 30, 10% off for bags of 50 and 15% off for bags of 100

£4.60

The Twin Cap with bayonet fitting, designed specifically for the Air Bubble Jets, gives forward and backward-facing angles to improve spray penetration. Enabling faster speeds, higher volumes and increased crop penetration. Also suitable for use with standard flat fan nozzles. The 30 degree forward and 30 degree backward facing nozzles in the Twin Cap, ensure optimal crop coverage and penetration under the crop canopy. This would be ideal on leafy crops such as potatoes for blight control.

£2.59

Conventional flat fan (110°) nozzles ideal for the overall spray application of herbicides, fungicides, insecticides and growth regulators. Moulded in polyacetal and colour coded to ISO guidelines.

 

Get 5% off for bags of 30, 10% off for bags of 50 and 15% off for bags of 100

 

 

 

£1.64

Offers the operator the benefit of angling the spray 30°, forwards or backwards along the spray boom whilst using their existing 8mm air induction or flat fan nozzles. Angled caps eliminate the need to purchase expensive replacement nozzles.

Available in all standard ISO colours and black.

Replacement seal also available.

£1.35

Standard 8mm Nozzle Cap and washer available in all ISO colours.

We also have 11mm versions in Blue, Red, Brown and Black

 

Get 5% off for bags of 30, 10% off for bags of 50 and 15% off for bags of 100

Shop by Brand

bottom of page