Simply Steer
Complete Auto steer kit that is useful for all farming seasons, it is simple to fit, low cost, fits most tractors and is simple to use.
Different GPS options available that are EGNOS, RTK NTRIP or RTK Base/Rover. This system works at low speeds down to 0.36kph with an accuracy of 2.5cm.
10.1 inch Touch Screen Display
Modular Design with Extensive Compatibility
Installation within 30mins
+/- 2.5cm High Accuracy
Terrain Compensation
Straight line and Curved guidance modes
0.1m/s Ultra-Low Speed
Real-Time Display
SBAS and RTK GPS options
Terminal
Display
10.1-inch capacitive touch screen, LED backlight, 1280x800 pixels, LCD>500 nits
Memory
4Gb RAM, 8Gb ROM
External interface
SIM card slot x1, Type-C port x2
Power supply
9 V -36 V
Signals
RF signal, positioning satellite signal, and 4G signal
Operating temp.
-20°C to +70°C
Storage temp.
-40°C to +85°C
IP Rating
IP65
Relative humidity
0% to 95%, 40°C (non-condensation)
Wi-Fi specifications
2.4 GHz frequency band, BT 5.0
Frequency range
2,412 MHz – 2,484 MHz
Dimensions
275 x 180 x 40 mm
GNSS Receiver
Frequency range
GPS L1/L2, GLONASS L1/L2, BDS B1/B2/B3, Galileo E1/E5b
Receiver Frequency
20 Hz
Operating voltage
9 V –36 V
Operating current
< 300 mA
Operating temp.
-20°C to +70°C
Storage temp.
-40°C to +85°C
IP rating
IP66
External interface
TNC dual antenna extension x1, TypeC debug port × 1
Dimensions
162 x 78 mm
Electric Steering Wheel
Splined sleeve
Multiple models
Power supply
12 V or 24 V
Peak torque
15 Nm (12 V), 20 Nm (24 V)
IP rating
IP65
Wheel diameter
410 mm
RTK NTRIP
This option utilises an existing RTK network of fixed base stations that deliver the correction signal via the internet and SIM cards. A subscription with a RTK service provider is required to use the correction signal, see ‘NTRIP Subscription’.
When purchasing the SimplySteer kit with RTK NTRIP there is the option to add a Subscription with one of our trusted RTK network providers, which will be discussed before completion or alternatively you can source your own network provider.
RTK BASE STATION
Uses an individual mobile base station for the correction signal, which is positioned within a limited distance to the GNSS Receiver on the vehicle. The base station transmits the correction signal via a set radio frequency.
RTK + SBAS (EGNOS, WAAS)
Adds the ability to use SBAS (Satellite Based Augmentation System) as well as either of the RTK options. SBAS uses a satellite transmitted correction signal and your location on the globe will determine which system is used, for example Europe uses EGNOS and USA uses WAAS. Although the service is free to use, it is less accurate then RTK, but is more than sufficient for operations that require less accuracy than planting if you have limited setup time or subscription.
Standard
The standard software includes the following features: -
Straight guidance line
Curved guidance line
Guidance line shift
Guidance line sync
Terrain compensation
Mark the edge (edge alert)
Ultra-low speed (optional)
NMEA (optional)
Area metering
SBAS (if purchased)
Advanced
The advanced software includes all the features of the standard software and adds the following: -
Field management
Task continuation
U-turn
Implement library
Pivot guidance line
Path numbering
